Procedure
1. Ensure the fuel system has been prepared for storage per the Fuel System procedure above. WARNING: Refer to Maintenance – Spark Plug Inspection and Replacement for the correct procedure for removing spark plug boots before proceeding.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 5 minutes conditions={"gearPosition":"Neutral","throttlePosition":"Idle RPM","context":"Storage preparation – stabilized fuel run-through"}
Diagnostic · Cause: Water or dirt in the fuel tank or fuel filter Test: Inspect and drain fuel tank; inspect fuel filter for water or dirt contamination
Spec · 850 RPM conditions={"gear":"Forward"}
Procedure · 1. Periodically inspect all fuel system components for leaks, softening, hardening, swelling, or corrosion, particularly after storage. WARNING: Fuel leakage is a fire or explosion hazard which can cause serious injur...
Diagnostic · Cause: Accidental or unintended activation of the lanyard stop switch Test: Inspect lanyard cord and switch for damage or wear before each use