Specification
4/4.9/5 HP Outboard (Models 4C, 4.9, 5B-D): Overall length
700 mm (27.6 in.) conditions={"models":"4C, 4.9, 5B-D"}
Specification
700 mm (27.6 in.) conditions={"models":"4C, 4.9, 5B-D"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Insert the lanyard element (plug end) fully into the lanyard stop switch. 2. Attach the lanyard cord clip to the operator's PFD or wrist. 3. If a shorter lanyard is desired, wrap the lanyard around the operator's w...
Diagnostic · Cause: Lanyard too short or not coiled, increasing likelihood of accidental activation Test: Check lanyard length (should be 122–152 cm stretched); ensure lanyard is coiled to minimize at-rest length
Spec · 310 mm (12.2 in.) conditions={"models":"4C, 4.9, 5B-D"}
Procedure · 1. Remove the water plug from the motor and install it in the flushing attachment (hose adapter). 2. Attach a hose to the flushing attachment. 3. Turn on the water and adjust the flow so water is exiting the water pum...
Diagnostic · Cause: Fuel flooding Test: Push in choke knob, wait 30 seconds, then continue cranking