Specification
Lanyard cord: Lanyard cord stretched length (imperial)
4–5 feet conditions={"state":"stretched"}
Specification
4–5 feet conditions={"state":"stretched"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Insert the lanyard element (plug end) fully into the lanyard stop switch. 2. Attach the lanyard cord clip to the operator's PFD or wrist. 3. If a shorter lanyard is desired, wrap the lanyard around the operator's w...
Diagnostic · Cause: Lanyard too short or not coiled, increasing likelihood of accidental activation Test: Check lanyard length (should be 122–152 cm stretched); ensure lanyard is coiled to minimize at-rest length
Spec · 122–152 cm conditions={"state":"stretched"}
Procedure · 1. Before each use, start the engine and stop it by pulling the lanyard cord to verify the stop switch works properly. WARNING: If the engine does not stop when the lanyard cord is pulled, have the switch repaired bef...
Diagnostic · Cause: Faulty lanyard stop switch Test: Start the engine and stop it by pulling the lanyard cord; if the engine does not stop, the switch requires repair