Specification
Lubrication: Engine Oil
Mercury/Quicksilver or recommended Two-Stroke engine oil
Specification
Mercury/Quicksilver or recommended Two-Stroke engine oil
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Mix oil and gasoline at a 1:25 ratio thoroughly in an approved container before pouring into the motor fuel tank. Do not pour oil and fuel separately into the fuel tank. 2. Pour the mixed fuel into the tank through...
Diagnostic · Cause: Lanyard too short or not coiled, increasing likelihood of accidental activation Test: Check lanyard length (should be 122–152 cm stretched); ensure lanyard is coiled to minimize at-rest length
Spec · Engine oil mixed gasoline
Procedure · 1. Place the outboard in water. Start the engine and let it run in neutral to warm up. 2. With engine running at fast idle, stop the fuel flow by closing the fuel shut-off valve. 3. When engine begins to stall, quickl...
Diagnostic · Cause: Cooling water intake obstruction, water pump failure, or blockage in cooling system Test: Stop engine and check cooling water intake for obstruction