Diagnostic
No water flowing from water pump indicator hole
Cause: Cooling water intake obstruction, water pump failure, or blockage in cooling system Test: Stop engine and check cooling water intake for obstruction
Diagnostic
Cause: Cooling water intake obstruction, water pump failure, or blockage in cooling system Test: Stop engine and check cooling water intake for obstruction
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · ~15 degrees conditions={"operation":"Release from shallow water drive to run position"}
Procedure · 1. Warm up the engine for three minutes to allow the lubrication system to circulate and deliver oil to all moving parts. WARNING: Without sufficient cooling water, the engine, the water pump, and other components wil...
Spec · Trim down conditions={"label":"b","description":"Bow enters water; speed decreases; risk of water entering boat"}
Procedure · 10. Pull the starter rope slowly until you feel the starter engage, then pull rapidly to crank the engine. Allow the rope to return slowly. Repeat until the engine starts. 11. Check for a steady stream of water flowin...
Diagnostic · Cause: Water or dirt in the fuel tank or fuel filter Test: Inspect and drain fuel tank; inspect fuel filter for water or dirt contamination