Specification
Lubrication System: Recommended Oil
Mercury or Quicksilver Premium 2-Cycle TC-W3 Outboard Oil conditions={"certification":"NMMA TC-W3 2-Cycle"}
Specification
Mercury or Quicksilver Premium 2-Cycle TC-W3 Outboard Oil conditions={"certification":"NMMA TC-W3 2-Cycle"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Drain and refill the gearcase lubricant. Refer to Gearcase Lubrication section for details.
Diagnostic · Cause: Recoil/rewind starter mechanism failure Test: Remove upper motor cover and recoil starter; wrap rope around starter pulley and pull quickly to verify manual start capability
Spec · Mercury or Quicksilver Premium Plus TC-W3 2-Cycle Outboard Oil conditions={"note":"For added protection and lubrication"}
Procedure · 1. Lubricate Co-Pilot threads with 2-4-C with PTFE. 2. Lubricate Swivel Bracket through fittings with 2-4-C with PTFE. 3. Lubricate Transom Clamp Screw threads with 2-4-C with PTFE. 4. Lubricate Tiller Handle Rubber B...
Diagnostic · Cause: Lanyard too short or not coiled, increasing likelihood of accidental activation Test: Check lanyard length (should be 122–152 cm stretched); ensure lanyard is coiled to minimize at-rest length