Specification
Transom: Transom Height (S shaft)
435 mm conditions={"shaft":"S","imperial":"17.1 in."}
Specification
435 mm conditions={"shaft":"S","imperial":"17.1 in."}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Position the outboard at the center of the transom. Mount it using a cushioning pad or plate. 2. Measure the transom height of the boat. Verify the anti-ventilation plate sits 30–50 mm (1.2–2 in.) below the bottom ...
Diagnostic · Cause: Improper installation of the outboard on the transom Test: Verify outboard is mounted per Mercury Marine validated fastener instructions and torque specifications
Spec · 562 mm conditions={"shaft":"L","imperial":"22.1 in."}
Procedure · 1. Trail the boat with the outboard tilted down (normal operating position). Do NOT rely on the tilt lock mechanism to support the outboard in the tilted up position during trailering. WARNING: The tilt lock mechanism...
Diagnostic · Cause: Other accessories (e.g., tow sport bars, boarding ladders) mounted to the boat using the outboard's provided fasteners Test: Inspect transom mounting hardware to confirm it is used exclusively for securing the ...