Wiring and Connectors: Maintenance interval – wiring and connectors check

Related KB links

• Every 300 Hours / Three Years Maintenance – 75–115 HP 4-Stroke

  Procedure · 1. Check power trim fluid. Refer to Checking Power Trim Fluid section. 2. Lubricate all lubrication points. Lubricate more frequently when used in saltwater. Refer to Lubrication Points section. 3. Replace water pump ...

• Upper Driveshaft Splines: Maintenance interval – upper driveshaft spline lubrication

  Spec · Every 300 hours of use or three years (dealer service) conditions={"service_level":"dealer"}

• Every Use / Pre-Operation Checks – Air Intake (75–115 HP 4-Stroke)

  Procedure · 1. Check that the intake silencer is in place, if equipped. 2. Check that the idle relief muffler is in place, if equipped. 3. Check for loose hose clamps and rubber boots on the air intake assembly, if equipped.

• Spark Plugs: Maintenance interval – spark plug replacement

  Spec · Every 300 hours of use or three years conditions={"interval_type":"time or hours"}

• Power Trim: Maintenance interval – power trim fluid check

  Spec · Every 300 hours of use or three years conditions={"interval_type":"time or hours"}