Procedure
1. Remove the side cover plugs of the handle that requires adjustment. 2. Turn the adjustment screw clockwise to increase tension on the control handle, or counterclockwise to decrease tension. 3. Adjust to the desired tension level. Tools: adjustment screwdriver
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Adjustable via adjustment screws (clockwise = increase, counterclockwise = decrease) conditions={"note":"May require periodic maintenance"}
Diagnostic · Cause: Insufficient handle or detent tension Test: Check handle and detent tension by attempting to move handle; if too easy to move, tension is too low.
Spec · Counterclockwise conditions={"action":"Decrease tension"}
Procedure · 1. Remove the control cover to access the detent tension adjustment screw. WARNING: Cover must be removed before adjustment. 2. Turn the detent tension adjustment screw clockwise to increase the effort required to mov...
Diagnostic · Cause: Failure causing forced neutral/idle on port outer engine; inner port engine also forced to neutral/idle Test: Move port control handle back to neutral then into gear to restore inner engine operation