Specification
Dual-Handle Electronic Remote Control (ERC): ERC Handle Tension Adjustability
Adjustable via adjustment screws (clockwise = increase, counterclockwise = decrease) conditions={"note":"May require periodic maintenance"}
Specification
Adjustable via adjustment screws (clockwise = increase, counterclockwise = decrease) conditions={"note":"May require periodic maintenance"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Locate the detent tension adjustment screw on the ERC remote control handle. 2. Turn the screw clockwise to increase tension (increase effort to move handle out of detent positions). 3. Turn the screw counterclockw...
Diagnostic · Cause: Insufficient handle or detent tension Test: Check handle and detent tension by attempting to move handle; if too easy to move, tension is too low.
Spec · First detent rearward from neutral conditions={"direction":"Pull handle back"}
Procedure · 1. Locate the control handle tension adjustment screw on the ERC remote control handle. 2. Turn the screw clockwise to increase tension (prevents unwanted motion in rough water). 3. Turn the screw counterclockwise to ...
Diagnostic · Cause: Failure causing forced neutral/idle on starboard outer engine; inner starboard engine also forced to neutral/idle Test: Move starboard control handle back to neutral then into gear to restore inner engine opera...