Procedure
1. Locate the control handle tension adjustment screw on the ERC remote control handle. 2. Turn the screw clockwise to increase tension (prevents unwanted motion in rough water). 3. Turn the screw counterclockwise to decrease tension. 4. Adjust to the desired tension. WARNING: The control handle tension screw may require periodic maintenance adjustment.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Adjustable via adjustment screws (clockwise = increase, counterclockwise = decrease) conditions={"note":"May require periodic maintenance"}
Diagnostic · Cause: Insufficient handle or detent tension Test: Check handle and detent tension by attempting to move handle; if too easy to move, tension is too low.
Spec · Counterclockwise conditions={"action":"Decrease tension"}
Procedure · 1. Locate the detent tension adjustment screw on the ERC remote control handle. 2. Turn the screw clockwise to increase tension (increase effort to move handle out of detent positions). 3. Turn the screw counterclockw...
Diagnostic · Cause: Failure causing forced neutral/idle on port outer engine; inner port engine also forced to neutral/idle Test: Move port control handle back to neutral then into gear to restore inner engine operation