Procedure
1. Locate the detent tension adjustment screw on the ERC remote control handle. 2. Turn the screw clockwise to increase tension (increase effort to move handle out of detent positions). 3. Turn the screw counterclockwise to decrease tension. 4. Adjust to the desired tension. WARNING: The detent tension screw may require periodic maintenance adjustment.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Clockwise conditions={"action":"Increase tension"}
Diagnostic · Cause: Insufficient handle or detent tension Test: Check handle and detent tension by attempting to move handle; if too easy to move, tension is too low.
Spec · Adjustable via adjustment screws (clockwise = increase, counterclockwise = decrease) conditions={"note":"May require periodic maintenance"}
Procedure · 1. Remove the control cover to access the detent tension adjustment screw. WARNING: Cover must be removed before adjustment. 2. Turn the detent tension adjustment screw clockwise to increase the effort required to mov...
Diagnostic · Cause: Excessive trim-in (trim under) causing the bow to plow into the water; unexpected turn can occur when any turn is attempted or a significant wave is encountered Test: Check trim angle; install stainless steel t...