Procedure
Air Filter Removal
1. Remove the FSM vent hose and the engine ventilation hose from the flywheel cover.
Procedure
1. Remove the FSM vent hose and the engine ventilation hose from the flywheel cover.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 6.0 liter (6.3 US qt) liter conditions={"includes":"oil filter replacement"}
Diagnostic · Cause: Water in the fuel filter has reached the full level Test: Visually inspect fuel filter holder for water accumulation
Spec · Greater than or equal to the overspeed RPM limit conditions={"reference":"See Specifications section for exact RPM value"}
Procedure · 1. Remove the bolts securing the flywheel cover to the rear mounting posts. Note: includes flywheel cover bolt and washer (×2), FSM vent hose, and crankcase ventilation hose. 2. Lift the flywheel cover off the front m...
Diagnostic · Cause: Excessive trim-out (trim up) condition Test: Reduce trim angle and observe whether porpoising and ventilation cease