Specification
PCM / Engine Guardian: Overspeed Rev Limit Trigger
Greater than or equal to the overspeed RPM limit conditions={"reference":"See Specifications section for exact RPM value"}
Specification
Greater than or equal to the overspeed RPM limit conditions={"reference":"See Specifications section for exact RPM value"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Completely reduce the throttle for three seconds. WARNING: There is no audible warning while Engine Guardian overspeed limit is active. 2. Engage the throttle. If the engine does not respond, repeat step one.
Diagnostic · Cause: Engine operated at RPM greater than or equal to the overspeed rev limit Test: 1. Completely reduce throttle for three seconds. 2. Engage throttle. If engine does not respond, repeat step one.
Spec · below 2000 RPM conditions={"mode":"Shallow water operation","note":"Reduce engine speed below 2000 RPM before tilting outboard up"}
Procedure · 1. Move the control handle into the neutral position. 2. Press the throttle only button while moving the control handle ahead to the forward detent. 3. Confirm engagement: the horn will sound to indicate throttle only...
Diagnostic · Cause: Critical sensor detected early indication of a problem Test: Reduce engine speed; move throttle lever back to idle position to reset Engine Guardian. If system determines reset did not correct the problem, Engi...