Procedure
1. Completely reduce the throttle for three seconds. WARNING: There is no audible warning while Engine Guardian overspeed limit is active. 2. Engage the throttle. If the engine does not respond, repeat step one.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Greater than or equal to the overspeed RPM limit conditions={"reference":"See Specifications section for exact RPM value"}
Diagnostic · Cause: Engine operated at RPM greater than or equal to the overspeed rev limit Test: 1. Completely reduce throttle for three seconds. 2. Engage throttle. If engine does not respond, repeat step one.
Spec · Upper half of recommended full throttle RPM range conditions={"throttle":"Full throttle","load":"Normal load conditions"}
Procedure · 1. Reduce engine speed upon Engine Guardian activation (warning horn sounds for six seconds and/or engine power is reduced). 2. Move the throttle lever back to the idle position to reset the Engine Guardian system. 3....
Diagnostic · Cause: Critical sensor detected early indication of a problem Test: Reduce engine speed; move throttle lever back to idle position to reset Engine Guardian. If system determines reset did not correct the problem, Engi...