Procedure
1. Inspect each anode periodically, especially in saltwater environments where erosion is accelerated. WARNING: Never paint or apply a protective coating on the anode as this will reduce its effectiveness. 2. Replace the anode before it is completely eroded to maintain corrosion protection.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Adjustable via adjustment screws (clockwise = increase, counterclockwise = decrease) conditions={"note":"May require periodic maintenance"}
Diagnostic · Cause: Failure to flush internal water passages with fresh water after use in saltwater or polluted water, leading to deposit buildup Test: Inspect and flush internal cooling water passages; refer to Maintenance – Flu...
Spec · 50 % conditions={"mode":"DOCK","description":"Control lever operation reduces throttle capacity to approximately 50% of normal control lever throttle demand"}
Procedure · 1. Flush the internal water passages of the outboard with fresh water after each use in salt or polluted water to prevent deposit buildup from clogging water passages. Refer to Maintenance – Flushing the Cooling Syste...
Diagnostic · Cause: Collision with underwater obstacle Test: Take outboard to authorized dealer for thorough inspection and necessary repair