Procedure
1. Push the control handle forward from neutral to the first detent to engage forward gear. 2. Continue pushing the control handle forward past the first detent to increase speed in forward gear. 3. Pull the control handle back from neutral to the first detent to engage reverse gear. 4. Continue pulling the control handle back past the first detent to increase speed in reverse gear.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Clockwise conditions={"action":"Increase tension"}
Diagnostic · Cause: Engine is in Throttle-Only mode Test: Check if Throttle-Only mode has been activated via the 'Throttle-Only' button (item d) on the ERC
Spec · Counterclockwise conditions={"action":"Decrease tension"}
Procedure · 1. Remove the control cover to access the detent tension adjustment screw. WARNING: Cover must be removed before adjustment. 2. Turn the detent tension adjustment screw clockwise to increase the effort required to mov...
Diagnostic · Cause: Failure causing forced neutral/idle on port outer engine; inner port engine also forced to neutral/idle Test: Move port control handle back to neutral then into gear to restore inner engine operation