Specification
Control handle tension adjustment screw: Control handle tension adjustment screw direction to increase tension
Clockwise conditions={"action":"Increase tension"}
Specification
Clockwise conditions={"action":"Increase tension"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Remove the side cover plugs of the handle that needs adjustment. 2. Turn the adjustment screw clockwise to increase tension on the control handle, or counterclockwise to decrease tension. 3. Adjust to the desired t...
Diagnostic · Cause: Insufficient handle or detent tension Test: Check handle and detent tension by attempting to move handle; if too easy to move, tension is too low.
Spec · Counterclockwise conditions={"action":"Decrease tension"}
Procedure · 1. Remove the control cover to access the control handle tension adjustment screw. WARNING: Cover must be removed before adjustment. 2. Turn the control handle tension adjustment screw clockwise to increase tension, o...
Diagnostic · Cause: Failure causing forced neutral/idle on starboard outer engine; inner starboard engine also forced to neutral/idle Test: Move starboard control handle back to neutral then into gear to restore inner engine opera...