Procedure
1. Remove the side cover plugs of the handle that needs adjustment. 2. Turn the adjustment screw clockwise to increase tension on the control handle, or counterclockwise to decrease tension. 3. Adjust to the desired tension.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Counterclockwise conditions={"action":"Decrease tension"}
Diagnostic · Cause: Reduced air density due to high elevation, high temperature, low barometric pressure, or high humidity — cannot be compensated by engine fuel or electronic management systems Test: Verify operating conditions; ...
Spec · Clockwise conditions={"action":"Increase tension"}
Procedure · 1. Remove the side cover plugs of the handle that requires adjustment. 2. Turn the adjustment screw clockwise to increase tension on the control handle, or counterclockwise to decrease tension. 3. Adjust to the desire...
Diagnostic · Cause: Insufficient handle or detent tension Test: Check handle and detent tension by attempting to move handle; if too easy to move, tension is too low.