Procedure
Engage 1 Lever Mode
1. Place both ERC levers in neutral. 2. Press the 1 LEVER button. The button light will turn on. 3. Place the starboard ERC lever into gear. 4. Move the handle — the engines' RPM and gear position will be synchronized.
Procedure
1. Place both ERC levers in neutral. 2. Press the 1 LEVER button. The button light will turn on. 3. Place the starboard ERC lever into gear. 4. Move the handle — the engines' RPM and gear position will be synchronized.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · First detent forward from neutral conditions={"direction":"Push handle forward"}
Diagnostic · Cause: ERC not placed in throttle only mode during unmanned helm operation Test: Verify ERC is in throttle only mode; gear position should remain in neutral while RPM can still be increased
Spec · First detent rearward from neutral conditions={"direction":"Pull handle back"}
Procedure · 1. Place both ERC levers in neutral. 2. Press the 1 LEVER button. The button light turns off.
Diagnostic · Cause: ERC levers at one or both helms are not in the neutral position Test: Verify ERC levers at both the active helm and the destination helm are in neutral before requesting transfer