Procedure
1. Tilt outboard up to the trailer position. 2. Turn the outboard so the drain hole is facing downward. 3. Remove the drain plug/seal and drain the engine oil into an appropriate container. 4. Lubricate the seal washer on the drain plug with oil and reinstall.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Mercury Verado NMMA FC-W certified SAE 25W-40 Synthetic Blend Marine 4-Stroke Engine Oil conditions={"use":"General, all-temperature use"}
Diagnostic · Cause: Lanyard too short or improperly routed, causing premature switch activation Test: Check lanyard routing; if lanyard is too short, do not shorten further — ensure at-rest coiled length is not taut while operator...
Spec · 6.0 liter (6.3 US qt) liter conditions={"includes":"oil filter replacement"}
Procedure · 1. Use the Crankcase Oil Pump (91‑90265A 5) to aid in the removal of engine oil without draining the crankcase. 2. Pump out the engine oil into an appropriate container. Tools: Crankcase Oil Pump 91‑90265A 5
Diagnostic · Cause: Remote control is not shifted to the neutral position