Procedure
Engine Shutdown Procedure
1. Reduce engine speed. 2. Shift outboard to neutral position. 3. Turn ignition key to "OFF" position.
Procedure
1. Reduce engine speed. 2. Shift outboard to neutral position. 3. Turn ignition key to "OFF" position.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · below 2000 RPM conditions={"mode":"Shallow water operation","note":"Reduce engine speed below 2000 RPM before tilting outboard up"}
Diagnostic · Cause: Lanyard too short or improperly routed, causing premature switch activation Test: Check lanyard routing; if lanyard is too short, do not shorten further — ensure at-rest coiled length is not taut while operator...
Spec · 2000 RPM conditions={"mode":"Shallow water operation","note":"If engine speed exceeds 2000 RPM, outboard will automatically return down to maximum trim range"}
Procedure · 1. Ensure engine speed is at idle before shifting the outboard into gear. WARNING: Never shift outboard into gear unless engine speed is at idle. Do not shift into forward or reverse when the engine is not running. 2....
Diagnostic · Cause: Incorrect starting procedure Test: Refer to Operation section