Steering Link Rod Pivot Points Lubrication

Related KB links

• Steering link rod self-locking nylon insert locknut: Steering Link Rod Locknut Torque

  Spec · Torque to specifications conditions={"note":"Torque locknut second, after bolt"}

• N/A - Steering link rod loosening or disengagement

  Diagnostic · Cause: Use of common (non-locking) nuts instead of required self-locking nylon insert locknuts, or improper installation/torque procedures Test: Inspect fasteners for correct part numbers (10-849838 bolt, 11-826709113...

• Steering link rod special washer head bolt: Steering Link Rod Bolt Torque

  Spec · Torque to specifications conditions={"note":"Torque bolt first, then torque locknut"}

• Steering Link Rod Assembly

  Procedure · 1. Assemble the steering link rod to the steering cable using two flat washers and a self-locking nylon insert locknut (c). WARNING: Improper fasteners or improper installation procedures can result in loosening or di...

• Bow steering or oversteering during planing

  Diagnostic · Cause: Excessive trim-in (trim under) causing the bow to plow into the water; unexpected turn can occur when any turn is attempted or a significant wave is encountered Test: Check trim angle; install stainless steel t...