Specification
Battery Terminal Hex Nuts: Hex Nut Torque (Battery Leads to Battery Posts)
13.5 Nm conditions={"equivalentImperial":"120 lb-in"}
Specification
13.5 Nm conditions={"equivalentImperial":"120 lb-in"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Ensure the battery meets the minimum ratings: 975 CCA and 65 Ah minimum. 2. Install the battery in an enclosed case in accordance with local regulations (required in some states). 3. Ensure battery cable installati...
Diagnostic · Cause: Wing nuts are not approved fasteners for battery terminals Test: Replace wing nuts with supplied 5/16 in. or 3/8 in. hex nuts; torque to 13.5 Nm (120 lb-in.)
Spec · 5/16 in. conditions={"supply":"included with engine rigging components"}
Procedure · 1. Remove the six screws securing the cowl lock and remove the lock. Retain the two hex nuts that are used to fasten the top two screws. WARNING: Retain the two hex nuts that are used to fasten the top two screws.
Diagnostic · Cause: Boat transom construction is inadequate to handle outboard mounting loads Test: Apply 75 Nm (55 lb-ft) torque to mounting locknut/bolt and inspect transom for cracking or deformation Expected: No cracking or yi...