Specification
Cooling System Flush: Cooling flush duration
15 minutes conditions={"procedure":"Cooling system flush"}
Specification
15 minutes conditions={"procedure":"Cooling system flush"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Remove the flush connector from the bottom cowl. 2. Remove the cover from the flush connector and thread a water hose into the flush connector. 3. Turn on the water tap (1/2 maximum) and let the water flush through...
Diagnostic · Cause: Failure to flush internal water passages with fresh water after use in saltwater or polluted water, leading to deposit buildup Test: Inspect and flush internal cooling water passages; refer to Maintenance – Flu...
Spec · 1/2 maximum conditions={"procedure":"Cooling system flush"}
Procedure · 1. With the engine turned off, place the outboard in either the operating position (vertical) or in a tilted position.
Diagnostic · Cause: Obstruction in water intake holes in lower unit Test: Stop engine; inspect water intake holes in lower unit for obstruction