Electronic Control Module and purge valve (ECM): ECM fuse rating

Related KB links

• Water Separating Fuel Filter Removal

  Procedure · 1. Turn ignition key switch to the OFF position. 2. Remove the fuel vapor purge relief valve cap located at the rear of the engine to release fuel system pressure. WARNING: Failure to release pressure from the fuel sy...

• Unwanted motion of ERC control handle

  Diagnostic · Cause: Insufficient handle or detent tension Test: Check handle and detent tension by attempting to move handle; if too easy to move, tension is too low.

• Dual-Handle Electronic Remote Control (ERC): ERC Forward Gear Engagement

  Spec · First detent forward from neutral conditions={"direction":"Push handle forward"}

• Disengage Throttle Only Mode

  Procedure · 1. Return the control handle to the neutral position.

• Port outer engine forced into neutral/idle condition while underway

  Diagnostic · Cause: Failure causing forced neutral/idle on port outer engine; inner port engine also forced to neutral/idle Test: Move port control handle back to neutral then into gear to restore inner engine operation