Engine: Idle speed in neutral gear

Related KB links

• Engage Throttle-Only Mode (Engine RPM Warm-Up Without Shifting Into Gear)

  Procedure · 1. Place the ERC lever in neutral. 2. Press the 'Throttle-Only' button. The button light will turn on and the neutral lights will blink.

• Starboard outer engine forced into neutral/idle condition while underway

  Diagnostic · Cause: Failure causing forced neutral/idle on starboard outer engine; inner starboard engine also forced to neutral/idle Test: Move starboard control handle back to neutral then into gear to restore inner engine opera...

• Engine: Shallow Water Operation - Max Engine Speed (Entry)

  Spec · below 2000 RPM conditions={"mode":"Shallow water operation","note":"Reduce engine speed below 2000 RPM before tilting outboard up"}

• Gear Shifting Procedure (DTS Panel Mount Remote Control)

  Procedure · 1. Ensure engine speed is at idle before shifting the outboard into gear. WARNING: Never shift outboard into gear unless engine speed is at idle. Do not shift into forward or reverse when the engine is not running. 2....

• Port outer engine forced into neutral/idle condition while underway

  Diagnostic · Cause: Failure causing forced neutral/idle on port outer engine; inner port engine also forced to neutral/idle Test: Move port control handle back to neutral then into gear to restore inner engine operation