Specification
Gearcase: Freezing Temperature – Gearcase Position (Moored/In Use)
Tilted down, gearcase submerged at all times conditions={"environment":"Freezing or near-freezing temperatures"}
Specification
Tilted down, gearcase submerged at all times conditions={"environment":"Freezing or near-freezing temperatures"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Keep the outboard tilted down at all times when moored or operating in freezing or near-freezing temperatures so the gearcase remains submerged. This prevents trapped water in the gearcase from freezing and damagin...
Diagnostic · Cause: Outboard left tilted up in freezing or near-freezing temperatures, allowing trapped water in the gearcase to freeze Test: Inspect water pump and gearcase components for freeze damage if outboard was stored tilt...
Spec · Tilted up, gearcase completely out of water conditions={"environment":"Saltwater or polluted water (except freezing temperatures)"}
Procedure · 1. Store the outboard in the full down (upright/vertical) position to allow water to drain out and prevent freezing of water trapped in cooling passages or propeller exhaust outlet. WARNING: Storing the outboard in a ...
Diagnostic · Cause: Lanyard too short or improperly routed, causing premature switch activation Test: Check lanyard routing; if lanyard is too short, do not shorten further — ensure at-rest coiled length is not taut while operator...