Specification
Rear cowl latch - back screws (4): Rear cowl latch back screws (4) torque
15 Nm conditions={"lb-in":"53","lb-ft":"–"}
Specification
15 Nm conditions={"lb-in":"53","lb-ft":"–"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Check and correct spark plug gap on all plugs before installation. Measure gap with a feeler gauge or pin gauge — never use a wedge-type gap checking tool. 2. To widen the gap, use a tool that only pulls back on th...
Diagnostic · Cause: Failure causing forced neutral/idle on starboard outer engine; inner starboard engine also forced to neutral/idle Test: Move starboard control handle back to neutral then into gear to restore inner engine opera...
Spec · 25 Nm conditions={"fastener":"top screws with hex nuts (2)","lb_in":"89"}
Procedure · 1. Remove the pivot screw and flat washer from the rear cowl latch. 2. Pull out on the rear corner of the latch to clear the rear cover, then remove the rear cowl latch. WARNING: Ensure latch is fully cleared from the...
Diagnostic · Cause: Failure causing forced neutral/idle on port outer engine; inner port engine also forced to neutral/idle Test: Move port control handle back to neutral then into gear to restore inner engine operation