Diagnostic
Anode eroded more than 1/3 of original size
Cause: Galvanic corrosion consuming the sacrificial anode Test: Visual inspection of anode size relative to original dimensions
Diagnostic
Cause: Galvanic corrosion consuming the sacrificial anode Test: Visual inspection of anode size relative to original dimensions
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Approx. 3000 rpm conditions={"duration":"2–3 hrs","throttlePosition":"Less than 3/4 throttle","fullThrottleInterval":"1 min every 10 min"}
Procedure · 1. Locate the sacrificial anode(s) on the gear case, cylinder, etc. 2. Inspect the anode. If it is eroded more than 1/3 of its original size, replace it. 3. For the CD unit anode (*2): Remove the CD unit to access the...
Spec · 2–3 hrs conditions={"throttlePosition":"Less than 3/4 throttle","speed":"Approx. 3000 rpm max; full throttle allowed for 1 min every 10 min","phase":"3"}
Procedure · 1. Inspect the anode. If the anode is eroded more than 1/3 of its original size, replace it. 2. Locate the anode(s) on the gear case, cylinder, etc. Note: On Power tilt models (*1), an additional anode location applie...
Diagnostic · Cause: Possible battery drain or engine flood; starter overuse Test: Return main switch to ON, wait 10 seconds or more, then attempt to crank again