Diagnostic
Engine failing to start
Cause: Lock plate not fitted
Diagnostic
Cause: Lock plate not fitted
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 10 cm (4 in.) conditions={"context":"Engine started in test tank"}
Procedure · 1. Put a piece of wood block between the propeller blade and anti-ventilation plate to hold the propeller. WARNING: Do not install or remove propeller with spark plug caps attached, shift in forward or reverse, main s...
Spec · Fill to between upper limit and lower limit shown on dipstick conditions={"engine_position":"vertical","note":"Engine oil is drained for shipping at factory; must fill before first start"}
Procedure · 1. Full open the air vent screw on the fuel tank cap. 2. Loosen the tank cap until it contacts the tab lock and release internal pressure completely. After that, close the tank cap until two clicks sound is heard. 3. ...
Diagnostic · Cause: Lock plate not fitted