Specification
Engine oil: Engine oil fill requirement
Fill to between upper limit and lower limit shown on dipstick conditions={"engine_position":"vertical","note":"Engine oil is drained for shipping at factory; must fill before first start"}
Specification
Fill to between upper limit and lower limit shown on dipstick conditions={"engine_position":"vertical","note":"Engine oil is drained for shipping at factory; must fill before first start"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Note: The engine oil is drained for shipping from the factory. Be sure to fill the engine to the proper level before starting the engine. WARNING: Use only high quality 4-stroke engine oil meeting FC-W, or API SH/S...
Diagnostic · Cause: Excess oil added during replenishment Test: Check dipstick level against upper limit mark
Spec · 800 mL conditions={"position":"upper level mark"}
Procedure · 1. Place the engine in a vertical (upright) position. WARNING: Always ensure outboard motor is upright when checking or changing oil. 2. Remove the top cowl and the oil filler cap. 3. Fill the engine through the fille...
Diagnostic · Cause: Overfilling of engine oil Test: Check oil gauge level with outboard motor in upright and level position