Procedure
1. Note: The engine oil is drained for shipping from the factory. Be sure to fill the engine to the proper level before starting the engine. WARNING: Use only high quality 4-stroke engine oil meeting FC-W, or API SH/SJ/SL ratings. Use of oils that do not meet these requirements will result in reduced engine life and other engine problems. 2. Follow the engine oil filling instructions on page 61 to properly fill the engine with oil.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Fill to between upper limit and lower limit shown on dipstick conditions={"engine_position":"vertical","note":"Engine oil is drained for shipping at factory; must fill before first start"}
Diagnostic · Cause: Excess oil added during replenishment Test: Check dipstick level against upper limit mark
Spec · Middle dipstick mark conditions={"starting_level":"low or at minimum mark"}
Procedure · 1. Place the engine in a vertical (upright) position. WARNING: Always ensure outboard motor is upright when checking or changing oil. 2. Remove the top cowl and the oil filler cap. 3. Fill the engine through the fille...
Diagnostic · Cause: Overfilling of engine oil Test: Check oil gauge level with outboard motor in upright and level position