label item 2 - Oil pressure warning lamp illuminated (label item 2)

Related KB links

• Tohatsu MFS6/8/9.8B EFT/EPT: part_24

  Spec · Warning Lamp

• Engine oil replacement

  Procedure · 1. Stop the engine and leave it in a vertical position for over 5 minutes. WARNING: Do not fill engine oil just after operation; allow engine to cool to avoid injury from high temperatures. 2. Tilt up the outboard mot...

• Electronic Safety Governor (Low Speed ESG): Low Speed ESG RPM Limit

  Spec · 2800 rpm conditions={"trigger":"Cooling water fault, oil pressure fault, or sensor fault"}

• Response to Low Speed ESG Activation / Low Oil Pressure (Fault Code 2)

  Procedure · 1. Move to a safe place quickly. WARNING: Do not continue to run the engine even though speed is limited to 2800 min⁻¹ (rpm). 2. Stop the engine and allow it to cool down. 3. Check engine oil level and add engine oil ...

• Low oil pressure warning lamp - Low oil pressure warning lamp is lit or oil leak is found

  Diagnostic · Cause: Low oil pressure or oil leak Test: Visual inspection of oil level and leak points