Procedure

Accessories Kit – Service Tools & Spare Parts Inventory

1. Verify all service tools are present in the tool bag: Pliers (×1), Socket wrench 10×13 mm (×1), Socket wrench 16 mm spark plug (×1), Socket wrench handle (×1), Screwdrivers cross-and-straight-point (×1), Screwdriver handle (×1). 2. Verify all spare parts are present: Emergency starter rope (×1), Spark plug NGK DCPR6E (×1), Split pin (×1), Stop switch lock (×1). 3. Verify parts packaged with engine according to model variant (EP/EPT/EFT): Fuel tank 12 L (×1), Primer bulb set (×1), Remote control box set for EP/EPT (×1), Harness sleeve 12–90 mm for EP only (×1), mounting bolts, nuts, washers, cable joints, and snap pins as listed per variant. Tools: Tool bag, Pliers, Socket wrench 10 × 13 mm, Socket wrench 16 mm (spark plug), Socket wrench handle, Screwdrivers (Cross- and straight-point), Screwdriver handle Parts: Emergency starter rope, Spark plug (NGK: DCPR6E), Split pin, Stop switch lock, Fuel tank (12 L), Primer bulb, Remote control box (EP/EPT only), Harness sleeve – EP only, 12–90 mm (Tool bag), Bolt M8 x 85 mm – EPT (qty 4), Nylon locking nut 8 mm – EPT (qty 4), Washer 8 mm – EPT (qty 8), Bolt M8 x 85 mm – EP/EFT (qty 2), Nylon locking nut 8 mm – EP/EFT (qty 2), Washer 8 mm – EP/EFT (qty 4), Cable joint set – EP/EPT (qty 1), Cable joint – EP/EPT (qty 2), Washer 8.5-18-1.6 – EP/EPT (qty 2), Snap pin – EP/EPT (qty 2)