Procedure
1. Identify all grease points as shown in the diagram on page 75 (reference ENOM00960-0 / ENOF01429-0). 2. Apply water proof grease to each of the indicated parts/grease points. Parts: Water proof grease
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Waterproof grease
Diagnostic · Cause: Trim angle set too low Test: Observe hull attitude relative to water surface while underway Expected: Hull horizontal; anti-ventilation plate parallel to water surface
Spec · 5–25 mm (0.2–1 in) conditions={"note":"Minimum distance between bottom cowl and water surface to prevent water ingress"}
Procedure · 1. Identify all grease points on the engine as shown in the diagram (reference ENOM00960-1 / ENOF01429-0). 2. Apply waterproof grease to each of the indicated grease points on the engine. Parts: Waterproof grease
Diagnostic · Cause: Underlying electrical fault not corrected prior to fuse replacement Test: Attempt to identify and correct the root cause of the blown fuse before replacing; if fuse continues to blow, request an authorized Toha...