All designated grease points: Grease type

Related KB links

• Apply water proof grease to designated grease points

  Procedure · 1. Identify all grease points as shown in the diagram on page 75 (reference ENOM00960-0 / ENOF01429-0). 2. Apply water proof grease to each of the indicated parts/grease points. Parts: Water proof grease

• Engine overheating during shallow water operation

  Diagnostic · Cause: Outboard motor tilted too high, causing air to be sucked through the water inlet Test: Check that the cooling water intake (water inlet) remains fully submerged during shallow water drive

• Outboard motor tilt: Shallow water tilt angle

  Spec · ~40 degrees conditions={"type":"Manual tilt (MF, EF type)","shift_lever":"Neutral or Forward"}

• Apply waterproof grease to grease points

  Procedure · 1. Identify all grease points on the engine as shown in the diagram (reference ENOM00960-1 / ENOF01429-0). 2. Apply waterproof grease to each of the indicated grease points on the engine. Parts: Waterproof grease

• Blown fuse

  Diagnostic · Cause: Short-circuit or electrical overload in the system Test: Remove fuse and visually inspect for blown condition; replace with fuse of identical specified rating only.