Procedure
Manual Tilt (Standard) - Tilt Down
1. Slightly tilt the motor up. 2. Pull the tilt lever toward you to release the tilt-lock. 3. Lower the motor slowly to the tilt down position.
Procedure
1. Slightly tilt the motor up. 2. Pull the tilt lever toward you to release the tilt-lock. 3. Lower the motor slowly to the tilt down position.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 5–6 times conditions={"procedure":"Tilt outboard motor manually up/down with manual release valve set to Manual side"}
Diagnostic · Cause: Entrapped air in the Power Tilt unit Test: Perform air purging procedure: set manual release valve to Manual, tilt motor up/down 5–6 times manually, then close valve to Power side
Spec · Oil level must reach the bottom line of the plug hole conditions={"motorPosition":"Tilted up and locked with tilt stopper","tankPosition":"Vertical"}
Procedure · 1. Slightly tilt the motor up. 2. Pull the tilt lever toward you to release the tilt-lock. 3. Lower the motor slowly.
Diagnostic · Cause: Manual relief valve is open/not fully closed Test: Inspect and confirm the manual relief valve is fully closed before engine operation