Procedure
Power Tilt – Tilt Up
1. Operate the Power Tilt switch and tilt the outboard motor up. 2. Lock the tilt with the Tilt stopper after the outboard motor has been tilted up.
Procedure
1. Operate the Power Tilt switch and tilt the outboard motor up. 2. Lock the tilt with the Tilt stopper after the outboard motor has been tilted up.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Oil level must reach the bottom line of the plug hole conditions={"motorPosition":"Tilted up and locked with tilt stopper","tankPosition":"Vertical"}
Diagnostic · Cause: Dead battery or failed power tilt switch. Test: Attempt to operate the power tilt switch; if no response, check battery charge and switch continuity.
Spec · 5–6 times conditions={"procedure":"Tilt outboard motor manually up/down with manual release valve set to Manual side"}
Procedure · 1. Operate the Power Tilt switch to tilt the outboard motor up. 2. Lock the tilt with the Tilt stopper after the outboard motor has been fully tilted up.
Diagnostic · Cause: Battery is dead Test: Check battery charge; if dead, use the manual relief valve to allow manual tilting