Procedure
Power Tilt Type – Set Shallow Water Running Position
1. Operate the Power Tilt switch and tilt the outboard motor up into the desired shallow water running position.
Procedure
1. Operate the Power Tilt switch and tilt the outboard motor up into the desired shallow water running position.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · ~40 degrees conditions={"type":"Manual tilt (MF, EF type)","shift_lever":"Neutral or Forward"}
Diagnostic · Cause: Outboard motor tilted too high, causing air to be sucked through the water inlet Test: Check that the cooling water intake (water inlet) remains fully submerged during shallow water drive
Spec · Oil level must reach the bottom line of the plug hole conditions={"motorPosition":"Tilted up and locked with tilt stopper","tankPosition":"Vertical"}
Procedure · 1. Operate the Power Tilt switch and tilt the outboard motor up into the desired shallow water running position.
Diagnostic · Cause: Outboard motor tilted up while engine is running, preventing cooling water from being supplied.