Procedure
1. Note that engine oil is drained for shipping from the factory. Fill the engine to the proper level before starting. WARNING: Failure to fill oil before starting may damage the engine. 2. Follow oil fill instructions on page 61 to properly fill the engine with oil.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Fill to between upper limit and lower limit shown on dipstick conditions={"engine_position":"vertical","note":"Engine oil is drained for shipping at factory; must fill before first start"}
Diagnostic · Cause: Overfilling of engine oil Test: Check oil gauge level with outboard motor in upright and level position
Spec · Engine cooled conditions={"engine_state":"cold"}
Procedure · 1. Note: The engine oil is drained for shipping from the factory. Be sure to fill the engine to the proper level before starting the engine. WARNING: Use only high quality 4-stroke engine oil meeting FC-W, or API SH/S...
Diagnostic · Cause: Low oil pressure causes oil pressure switch to turn ON, activating Low Speed ESG which suppresses ignition Test: Check engine oil level; add oil if necessary Expected: Oil pressure switch OFF under normal condi...