Procedure
1. Tighten the propeller nut to specified torque (12 N·m / 9 ft·lb / 1.2 kgf·m) and align one of the grooves with the propeller shaft hole. (torque: 12 N·m) 2. Install a new split pin into the nut hole and bend both ends of the pin apart to lock the propeller in place. Parts: Split pin (new)
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 12 N·m conditions={"also":"9 ft·lb / 1.2 kgf·m"}
Diagnostic · Cause: Damaged or bent propeller
Spec · 25 N·m (ft·lb: 18, kgf·m: 2.5)
Procedure · 1. Place a wood block between the propeller blade and anti-ventilation plate to hold the propeller steady. 2. Remove the split pin, propeller nut, and washer. 3. Remove the propeller and thrust holder. 4. Apply waterp...
Diagnostic · Cause: Incorrect propeller selection