Specification
Propeller: Propeller Nut Torque
25 N·m (ft·lb: 18, kgf·m: 2.5)
Specification
25 N·m (ft·lb: 18, kgf·m: 2.5)
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Tighten the propeller nut to specified torque (12 N·m / 9 ft·lb / 1.2 kgf·m) and align one of the grooves with the propeller shaft hole. (torque: 12 N·m) 2. Install a new split pin into the nut hole and bend both e...
Diagnostic · Cause: Physical damage or wear to propeller blades Test: Visual inspection of propeller edge and blade geometry
Spec · 25 Nm conditions={"also":"18 ft-lb / 2.5 kgf-m"}
Procedure · 1. Place a wood block between the propeller blade and anti-ventilation plate to hold the propeller steady. 2. Remove the split pin, propeller nut, and washer. 3. Remove the propeller and thrust holder. 4. Apply waterp...
Diagnostic · Cause: Over-rotation of propeller caused by water spray when motor is not properly secured in forward gear and tilted up Test: Verify stop switch lock is removed, motor is in forward gear, and motor is tilted up when ...