Procedure
1. Make sure that the boat is properly moored and the outboard motor can be steered fully to the right and left. WARNING: Before shifting into forward or reverse, make sure no swimmer(s) is ahead or astern of the boat.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 32 degrees conditions={"position":"Forward (F) or Reverse (R)"}
Diagnostic · Cause: Idle speed is elevated during engine warm-up Test: Attempt to shift to neutral; if unsuccessful, stop engine, shift to neutral manually, then restart to continue warm-up
Spec · 300-450 mm conditions={"note":"Cable should be 300-450mm (11.8-17.7in) longer than the measured route distance"}
Procedure · 1. Ensure the boat is properly moored. WARNING: Make sure no swimmers are around the boat. 2. Verify that the outboard motor can be steered fully to the right and left. 3. Attach the emergency stop switch lanyard to t...
Diagnostic · Cause: Manual relief valve is open/not fully closed Test: Inspect and confirm the manual relief valve is fully closed before engine operation