Engine / Motor Assembly: Transom Height - Long (L)

Related KB links

• Trim angle adjustment – Power tilt type: Transom angle adjustment

  Procedure · 1. Stop the engine. 2. Shift into neutral position. 3. Tilt up the outboard motor. 4. Lock the tilt stopper. 5. Change the trim lock pin position as shown in the picture: (1) Trim lock pin, (2) Higher, (3) Lower.

• OTHERS - Engine speed abnormally low / Boat speed low / Overheating of engine / Warning lamp ON

  Diagnostic · Cause: Transom too high or too low

• Engine / Motor Assembly: Transom Height - Ultra Long (UL)

  Spec · 689 mm (27.1 in)

• Trim angle adjustment – Manual tilt RC type (Transom angle adjustment)

  Procedure · 1. Stop the engine. 2. Shift into forward. 3. Raise the outboard motor to the tilt up position.

• Engine oil over upper limit mark on oil gauge

  Diagnostic · Cause: Overfilling of engine oil Test: Check oil gauge level with outboard motor in upright and level position