Specification
Engine oil drain bolt: Oil drain bolt torque
24 N·m conditions={"also":"17 ft·lb, 2.4 kgf·m"}
Specification
24 N·m conditions={"also":"17 ft·lb, 2.4 kgf·m"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Tighten the oil filter to the correct torque. (torque: 24 Nm) WARNING: If a torque wrench is not available, a good estimate is 3/4 to 1 full turn past finger-tight. Have the oil filter adjusted to the correct torqu...
Diagnostic · Cause: Water has entered the lower unit and mixed with the gear oil Test: Inspect drained gear oil color during oil change
Spec · 24 N·m (ft·lb: 17, kgf·m: 2.4)
Procedure · 1. Stop the engine and leave it in a vertical position for over 5 minutes. WARNING: Do not fill engine oil just after operation; allow engine to cool to avoid injury from high temperatures. 2. Tilt up the outboard mot...
Diagnostic · Cause: Fuel contamination in engine oil Test: Smell and inspect oil on dipstick