Specification
Engine oil: Recommended oil viscosity (warm/hot climate)
10W-40 conditions={"temperature_range_C":"above approx. 10°C","temperature_range_F":"above approx. 50°F"}
Specification
10W-40 conditions={"temperature_range_C":"above approx. 10°C","temperature_range_F":"above approx. 50°F"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Tighten the oil filter to the correct torque. (torque: 24 Nm) WARNING: If a torque wrench is not available, a good estimate is 3/4 to 1 full turn past finger-tight. Have the oil filter adjusted to the correct torqu...
Diagnostic · Cause: Normal dilution from extended idling or trolling, especially in cooler water temperatures Test: Check operating conditions and oil consistency
Spec · 10W-30 conditions={"temperature_range_C":"down to approx. -30°C","temperature_range_F":"down to approx. -22°F"}
Procedure · 1. Place the engine in a vertical (upright) position. WARNING: Always ensure outboard motor is upright when checking or changing oil. 2. Remove the top cowl and the oil filler cap. 3. Fill the engine through the fille...
Diagnostic · Cause: Fuel dilution of engine oil, potentially from extended idling or trolling, especially in cooler water temperatures Test: Smell engine oil for strong fuel odor during oil inspection