Specification
Gear shift / Clutch: Required gear shift engine speed
Slow idle conditions={"note":"Engine must be at slow idle before shifting to prevent gear and clutch damage"}
Specification
Slow idle conditions={"note":"Engine must be at slow idle before shifting to prevent gear and clutch damage"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Attach the emergency stop switch lanyard to the operator's PFD or arm before cruising and keep it attached at all times. WARNING: Do not attach the tether to clothing that can be torn easily. Arrange tether so it w...
Diagnostic · Cause: Shifting performed at high engine speed instead of slow idle Test: Verify engine is at slow idle before shifting
Spec · 900 min⁻¹ (rpm) conditions={"clutch":"In gear"}
Procedure · 1. Ensure the boat is properly moored. WARNING: Make sure no swimmers are around the boat. 2. Verify that the outboard motor can be steered fully to the right and left. 3. Attach the emergency stop switch lanyard to t...
Diagnostic · Cause: Idle speed is elevated during engine warm-up Test: Attempt to shift to neutral; if unsuccessful, stop engine, shift to neutral manually, then restart to continue warm-up