Specification
MFS 8/9.8B EF/EP variant: Trim Positions (EF/EP)
3
Specification
3
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Stop the engine. 2. Shift into forward. 3. Raise the outboard motor to the tilt up position.
Diagnostic · Cause: Improper trim angle (excessive trim up or down) Test: Reduce speed immediately; stop boat and inspect thrust rod / priset knob position Expected: Thrust rod / priset knob positioned so hull runs horizontal
Spec · 5
Procedure · 1. Stop the engine. 2. Shift the outboard into forward. 3. Tilt the outboard up to one of the shallow water positions.
Diagnostic · Cause: Trim angle set too low (excessive trim down) Test: Observe hull attitude relative to horizontal water surface during slow-speed operation Expected: Hull horizontal; anti-ventilation plate parallel to water surface