Specification
MFS 8/9.8B: Overall Height (S)
1050 mm (in: 41.3) conditions={"model":"MFS 8/9.8B","transom":"S"}
Specification
1050 mm (in: 41.3) conditions={"model":"MFS 8/9.8B","transom":"S"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Before beginning the running test, confirm the boat with maximum capacity loading floats in a proper attitude. 2. Check the position of the water surface on the driveshaft housing. The anti-ventilation plate should...
Diagnostic · Cause: Transom too high or too low
Spec · 1050 mm (41.3 in) conditions={"transom":"S (Short)"}
Procedure · 1. To turn RIGHT: Turn the steering wheel to the RIGHT. 2. To turn LEFT: Turn the steering wheel to the LEFT.
Diagnostic · Cause: Trim angle set too low (excessive trim down) Test: Observe hull attitude relative to horizontal water surface during slow-speed operation Expected: Hull horizontal; anti-ventilation plate parallel to water surface